| № |
Authors Name/s, papers Title |
| Section 1. Materials: design, synthesis and characterization |
| 1.1.1 | Mikhail A. Gervasyev, Valentina A. Sharapova, Aleksey A. Berdnikov
Effect of Microalloying with Boron and Niobium on Properties of Cr-Mn-Mo Steels |
| 1.1.3 | Victor G. Shmorgun, Artem I. Bogdanov, Alexander O. Taube
Analysis of Thermal Stresses in Layered Composite Ad1 + Cr20ni80 + M1 After Heat Treatment |
| 1.1.4 | Nina A. Adamenko, Galina V. Agafonova, Andrej V. Kazurov
Effect of Explosive Processing on the Structure and Properties of Polyarylate |
| 1.1.6 | O.A. Nasibullina, A.G. Gareev
Destruction Patterns of X70 Steel Sample Possessing Cracks of Corrosion-Mechanical Origin, under Cyclic Loading |
| 1.1.8 | I.V. Gervasyeva, V.A. Milyutin, D.I. Davidov, Yu.V. Khlebnikova
The Use of Hydroextrusion for Plastic Deformation of Magnetostrictive Iron-Gallium Alloys |
| 1.1.9 | Hussam L. Alwan, N. Lezhnin, Yu. Kopobov
Analysis of the External Conditions Affecting on the Cavitation Resistance of a Steel |
| 1.1.10 | A.P. Iakovleva
Improving the Durability of Machine Parts Using a Combined Method |
| 1.1.14 | Nikita A. Zavarceva, Nadezhda T. Kareva
Determination of Polymorphic Transformation Temperature for Alloy VT8 |
| 1.1.16 | A.V. Ryabov
Medium-Carbon Free-Cutting Steel |
| 1.1.17 | K.L. Smirnov, E.G. Grigoryev, E.V. Nefedova
SiAlON-TiN Ceramic Composites by Electric Current Assisted Sintering |
| 1.1.18 | Vladimir Afanasyev, Marina Popova, Irina Zhibinova
Improving Strength of Structural Steels by Preheating in an Oxygen-Containing Medium |
| 1.1.19 | Vera V. Berezovskaya, Valentina A. Sharapova
Structural Transformations Influence on Mechanical-and-Physical and Chemical Properties of Fe-Cr-Co Alloys in Heating |
| 1.1.20 | T.V. Shveyova, V.I. Astashchenko, A.I. Shveyov
Shot Blasting of the Cemented Gear Parts |
| 1.1.21 | Ivan V. Ivanov, Elizaveta I. Tkachenko, Alexander Thoemmes
Corrosion Resistance Of Medical Stainless Steel Obtained By Non-Vacuum Electron Beam Cladding |
| 1.1.22 | Georgy Shimov
Methodology and Installation of the Etching of the Surface Layer from Pipes, Rods and Profiles for the Aim of the Analysis of Residual Stresses |
| 1.1.23 | Liudmila Shtirts, Svetlana Vlasova, Dmitry Meshcherskikh
Porous Material Production and Material Properties |
| 1.1.24 | E.N. Eremina, A.S. Losev, S.A. Borodikhin
Structure and Characteristics of the Metal of the Cr-Ni-Mo-Mn-Si-Ti-Nb System Obtained by Surfacing with a Flux-Cored Wire Alloyed by Boron Carbide |
| 1.1.25 | Alsu A. Yusupova, Galina A. Medvedeva, Alexander A. Bobrishev
Technology and Properties of Composite Materials with Modifier of Chloride Aluminum |
| 1.1.26 | Natalia V. Romanova, Lenar N. Shafigullin, Azat T. Gabdrakhmanov
Research of Polyethylene in Products of Autocomponents |
| 1.1.28 | Viacheslav V. Avdin, Valeria V. Trunova, Aleksandra V. Bulanova
Nanostructured Yttrium Oxide Obtained by Hydrolysis of Yttrium Sulfate |
| 1.1.30 | Д.Е. Живулин, Д.А. Жеребцов
Исследование структуры твердых растворов азота в графите |
| 1.1.31 | А.Ф. Кокорин, А.А. Казин, С.Г. Купцов
Повышение эроззионной стойкости графита гибридной электроискровой лазерной обработкой фазами внедрения |
| 1.1.32 | Oksana N. Gruba, Julia S. Dvoryashina
Modeling and Calculation of Thermochemical Characteristics of Crystalline Vanadium Oxides under Standard Conditions |
| 1.1.33 | O.V. Samoilova, E.A. Trofimov, E.R. Vakhitova
Effect of Cerium and Lanthanum Additives on the Phase Composition of the Copper-Nickel Alloys |
| 1.1.34 | Vitaly Smolko, Elizaveta Antoshkina
Measurement of Complex Dielectric Permittivity of Quartz Systems |
| 1.1.35 | Elizaveta Antoshkina, Olga Rakova, Andrey Efremov
Investigation of NiO – Al2O3 – SiO2 Properties via XRD, FTIR Techniques and Thermal Analysis |
| 1.1.36 | A.N. Dildin, V.Yu. Gerasimov, O.V. Zaitseva
The Structure of Multi-Layer Composite Material Obtained by the Method of Diffusion Welding |
| 1.1.37 | Д.Е. Живулин, Д.А. Винник, О.В. Зайцева
Анализ возможности экспериментального получения полизамещённых кристаллов со структурой гексаферрита М-типа |
| 1.1.38 | Nikolay A. Popov, Kseniya I. Lugovaya, Arcadiy Yu. Zhilyakov
Features of the Formation of Structure and Phases in Single-Crystal High-Temperature Alloys and Their Effect on Mechanical Properties |
| 1.1.39 | Viacheslav V. Avdin, TatyanaV. Mosunova, Artem V. Bogdanov
Influence of pH and Synthesis Duration on the Composition and Thermal Behavior of Hydrolysis Products of Lanthanum Nitrate |
| 1.1.42 | Аinagul Toleuova, Bakhyt Balbekova, Irina Erakhtina
Optimization of the Composition and Structure of Deformable Heat Resistant Aluminum Alloy |
| 1.1.43 | G.G. Mikhailov, L. A. Makrovets
Thermodynamic Modeling of the Processes of Interaction of Calcium, Magnesium, Aluminum and Boron with Oxygen in Metallic Melts |
| 1.1.47 | А.А. Бирюкова, Т.Д. Джиеналыев, А.В. Боронина
Керамические проппанты на основе ультраосновных пород месторождений хромитовых руд Казахстана |
| 1.1.48 | О.М. Kanunnikova, О.Yu. Goncharov, V.I. Ladyanov
Assessment of the Structural State of the Amorphous Alloys Thin Surface Layers |
| 1.1.50 | Sergei N. Fedorov, Vladimir Yu. Bazhin and Vladimir G. Povarov
Doping Titanium Dioxide by Fluoride Ion |
| 1.1.51 | Valentin Kharlamov, Aleksandr Krokhalev, Sergey Kuz’min, Vladimir Lysak, Vu Quoc Toan, Nguyen Ngoc Hung
Investigation of the structure and distribution of chemical elements between the phases of hard alloys of the Cr3C2-Ti system, obtained at various modes of explosive compaction |
| 1.1.52 | С.А. Котов, С.-В.Р. Музафарова, Д.А. Сафронов
Исследование процесса получения лент из порошков терморасширенного графита в зависимости от параметров процесса прокатки |
| 1.1.54 | O.V. Zaitseva, D.A. Vinnik, E.A. Trofimov
The polysubstituted M-type hexaferrite crystals growth |
| 1.1.55 | Gennady G. Mikhailov, Alla G. Morozova, Vitaly G. Bamburov
Investigation of physical and chemical processes of formation of composite materials with specified structural phase characteristics |
| 1.1.56 | G.F. Mukhametzyanova, N.N. Zapadnova, E.A. Zapadnova
Features of Technological Materials Application in Thermal Manufacturing |
| 1.1.57 | A.A. Solobai, A.V. Trukhanov, S.S. Grabchikov
Ni-Fe alloys as perspective materials for highly efficient magnetostatic shielding |
| 1.1.61 | D.A. Mirzaev, K.Yu. Okishev, A.A. Mirzoev, A.N. Makovetskii
Austenite to Ferrite Transformation Kinetics in Fe–9 %Cr Alloys. I. General Kinetic Analysis |
| 1.1.62 | Igor V. Bakina, Gennady G. Mikhailov, Valery A. Golubtsov, Ivan V. Ryabchikov, Ludmila E. Dresvyankina
Methods for Improving the Efficiency of Steel Modifying |
| 1.1.63 | Aleksey N. Shulgin, Aleksandr A. Dyakonov, Anastasia E. Gorodkova
Influence of the Glassfiber Filaments Distribution on Quality and Performance of Hole Processing on Printboards |
| 1.1.64 | T.I. Zubar, A.V. Trukhanov, D.A. Vinnik
Influence of Surface Energy on Ni-Fe Thin Films Formation Process |
| 1.1.65 | D.I. Tishkevich, A.I. Vorobjova, D.A. Vinnik
Template Assisted Ni Nanowires Fabrication |
| 1.1.66 | Alexey Stolyarov, Olga Nikitenko, Natalya Soloveva
Peculiarities of Microstructure Changing on Outer Surface of Carbon Steel Wire at Combined Deformational Processing by Drawing with Torsion |
| 1.1.67 | Alexandr Sychkov, Oleg Tulupov, Alexandr Moller
Reasons for breakage of welding rod and wire |
| 1.1.68 | Alexey Stolyarov, Guzel Kamalova, Marina Polyakova
Investigation of grain anisotropy on surface area between carbon steel wire and die at drawing |
| 1.1.99 | Boris A. Chaplygin, Vyacheslav V. Shirokov, Tat’yana A. Lisovskaya, Roman A. Lisovskiy
Improving the strength of abrasive wheels and optimizing the control over the strength of composite abrasive materials |
| 5253 | Galina I. Shcherbakova, Maxim S. Varfolomeev, Pavel A. Storozhenko
Solution to technological problems of raising the reliability and quality of castings based on titanium alloys |
| 5271 | Irina D. Zakir`yanova, Emma G. Vovkotrub, Ksenia O. Bobrova
Components of the GdOCl ? GdCl3 • 6H2O system: identification and determination by the Raman spectroscopy |
| 5280 | O.V. Bashkov, H. Khon, V.I. Zaikov, I.O. Bashkov, A.I. Evstigneev
On-line registration of damages in composite materials with fiber-optic acoustic emission sensors |
| 5335 | Vladimir I. Mironov, Olga A. Lukashuk, Ivan S. Kamantsev
Experimental Study of Strain-Softening Stage in Materials |
| 5352 | Raisa K. Mysik, Sergey V. Brusnitsyn, Andrey V. Sulitsin
Differential Thermal Analysis of Complex Alloyed Brass |
| 5404 | Alexander Thoemmes, Ivan Ivanov, Alexey Ruktuev
Characterization of Ti-xNb (x = 25 – 35) alloys in as melt and annealed states |
| 5415 | Ivan N. Egorov, Svetlana I. Egorova, Viktor P. Kryzhanovsky
Particle Size Distribution and Structural State Analysis of Mecanically Milled Strontium Hexaferrite |
| 5440 | V.G. Shmorgun, D.V. Pronichev, V.P. Kulevich
Influence of Thermal Exposure on the Structure and Phase Composition of Aluminized Layer Obtained by Explosion Welding and Hot-Dipping Process |
| 5517 | V.N. Pustovoit, Yu.V. Dolgachev, L.P. Aref`eva
Features of Martensitic Transformation in Steel During Quenching in a Constant Magnetic Field |
| 5519 | A.G. Illarionov, S.V. Grib, A.V. Huppeev
Effect of the Quenching Temperature on the Phase Composition and Young?s Modulus of Corrosion-resistant and Biocompatible Titanium Alloys |
b
| 5549 | Dmitry Kruchinin, Olga Paramonova, Elena Farafontova
Change of a State of the Optical Parts Surfaces Made of K8 Glass After Polishing Completion |
| 5579 | Alexey V. Bogomolov, Alibek N. Zhakupov, Almaz B. Kuandykov
Efficiency of thermocycling treatment application for hardening casing pipes from steel 09G2S to strength group Q125 |
| 5599 | Alexey Rodichev, Alexander Babin, Andrey Gorin
Experimental Studies of Wear Resistance of Anti-Friction Coatings of Bimetal Fluid-film Bearings |
| 5631 | Alexey Stolbovsky, Elena Farafontova, Vita Vyatchina
Regression Model of TCLE of Low Melting Glass of System MgSO4-KPO3-Na2B4O7 |
| 5647 | А.Ю. Стариков, С.А. Гудкова, Д.А. Винник
Выращивание монокристаллов замещенного алюминием гексаферрита стронция SrFe12-xAlxO19 |
| 5648 | Svetlana A. Gudkova, Danil A. Uchaev, Denis A. Vinnik
Powder diffraction and dilatometric study of SrFe12O19 |
| 5649 | А.Ю. Стариков, Д.М. Галимов, В.Е. Живулин
Синтез гексаферрита стронция SrFe12O19 |
| 5694 | Mikhail V. Maisuradze, Maxim A. Ryzhkov
Hardenability of Medium Carbon Cr-Mn-Mo Alloyed Steels |
| 5695 | Mikhail V. Maisuradze, Alexandra A. Kuklina
Numerical and Experimental Investigation of the Heat Treated Steel Part Microstructure and Hardness |
| 5708 | Anatoly A. Babenko, Vladimir I. Zhuchkov, Natalia I. Selmenskih
Effect of boron on the microstructure and mechanical properties of low-carbon tube steel |
| 5786 | O.M. Kanunnikova, V.V. Aksenova, G.A. Dorofeev
Ball-milling stimulated mechanochemical processes in the system "titanium – toluene" |
| 5852 | С.А. Гудкова, А.С. Чернуха, Д.А. Винник
Изучение структуры и механических свойств порошков гексаферрита стронция |
| 5868 | Vladimir I. Pastukhov, Irina A. Portnykh, Mikhail L. Lobanov
Effect of mesostructural elements on radiation-induced porosity in 16Cr-19Ni-2Mo-2Mn-Nb-Ti-V-P-B austenitic steel |
| 5951 | Boris Yur'ev, Vyacheslav Dudko
Development of Capillary Tube Production Technology |
| 5976 | Vladimir I. Pastukhov, Sergey S. Khvostov, Mikhail L. Lobanov
Effect of grain boundaries type on carbides precipitates in tempered martensite |
| Section 2. Technologies of pyrometallurgical processes |
| 1.2.4 | В.Т. Бурцев, С.Н. Анучкин, А.В. Самохин
Взаимодействие экзогенных наночастиц Al2O3 и MgAl2O4 с медью, растворенной в расплавах железа |
| 1.2.5 | Аrseniy O. Artemov, Stanislav V. Naumov, Michael N. Ignatov
Technology and equipment for plasma electric arc granulation of fused welding flux |
| 1.2.6 | В.Я. Дашевский, А.А. Александров, Л.И. Леонтьев
Раскисление сплавов системы Ni-Cr алюминием и титаном |
| 1.2.7 | Olga V. Belousova, Ksenia V. Kostina
The Analysis of the Influence Of Manufacturing Practice Of Anode Paste On Its Consumption |
| 1.2.9 | А.М. Клюшников, Е.Н. Селиванов
Термодинамическое моделирование совместной пирометаллургической переработки окисленных никелевых и сульфидных медных руд |
| 1.2.10 | Oleg V. Zayakin, Ilia N. Kel’
Promising Directions for the Stabilization of Ferroalloy Production Slags |
| 1.2.11 | Leonid A. Smirnov, Oleg V. Zayakin
The Time and Heat Dependence of the Nitrogen Distribution upon Steel Alloying with Nitrided Manganese |
| 1.2.12 | M.F. Gafarov, А.V. Senin, E.A. Gafarova
Modeling of Material and Heat Balance of Ferromanganese Blast Furnace Smelting Using Computer Environment Lasarus |
| 1.2.13 | Alexander D. Drozin, Maxim V. Dudorov, Natalia M. Yaparova
Non-Equilibrium Crystallization of a Eutectic Alloy. Mathematical Model |
| 1.2.15 | V.I. Zhuchkov, V.A. Salina, A.V. Sychev
Тhe study of the process of metal-thermal reduction of boron from the slag of the system CaO-SiO2-MgO-Al2O3-B2O3 |
| 1.2.16 | Leonid Levkov, Dmitry Shurygin, Mikhail Kisselman
New possibilities of ESR for modern machine engineering |
| 1.2.17 | Leonid Levkov, Denis Pankratov, Dmitry Shurygin
Iron oxidation state analysis in ESR slag |
| 1.2.22 | Igor M. Yachikov, Irina V. Portnova, Mikhail V. Bystrov
Efficiency of Application of Evaporative Cooling of Graphite Electrodes to Reduce Their Consumption in Arc Furnaces |
| 5381 | Boris Yur'ev, Vyacheslav Dudk
Development of the Process for Obtaining Iron-ore Pellets with Required Metallurgical Properties |
| 5441 | Boris Yur'ev, Vyacheslav Dudko, Anna Shageeva
Kinetics of Siderite Ore Roasting in the Shaft Furnace |
| 5443 | Nadezhda Cheremiskina, Nikolay Loshkarev, Vladislav Lavrov
Research of the thermal work of the drum-type chamber furnace with a constant temperature of the working space |
| 5444 | Natalia Shchukina, Nikolay Loshkarev, Vladislav Lavrov
Study on thermal operation and design of ring furnace of the pipe rolling plant |
| 5536 | A.G. Ryazanov, А.V. Senin, O.V. Khmeleva
Zinc ferrite decomposition by sodium carbonate and calcium oxide at roasting of steelmaking dust |
| 5538 | V.I. Matyukhin, S.Ya. Zhuravlev, A.V. Khandoshka
Development features of thermal and gas-dynamic performance of mineral wool cupola furnace |
| 5539 | V.I. Matyukhin, S.Ya. Zhuravlev, A.V. Khandoshka
Particular oxydation features of vairous mechanical strenght cokes |
| 5609 | Anatoly A. Babenko, Leonid A. Smirnov and Alena G. Upolovnikova / А.А. Бабенко, Л.А. Смирнов, А.Г. Уполовникова
Fundamental Research as a Basis for the Creation of New Technologies in Steel Ladle Metallurgy
Фундаментальные исследования как основа создания новой технологий в области ковшевой металлургии стали |
| 5634 | Alexey Shapovalov, Roman Dema, Olga Kalugina
Improvement of agglomeration technology by a sinter mix preheating |
| 5693 | А.А. Бабенко, В.И. Жучков, Н.И. Сельменских
Влияние бора на микроструктуру и механические свойства низкоуглеродистой трубной стали |
| 5767 | S.P. Salikhov, A.V. Roshchin
Direct Reduction of Iron from Crystal Lattice of a Complex Oxide |
| 5768 | K.I. Smirnov, S.P. Salikhov, V.E. Roshchin
Solid-Phase Reduction of Iron from Suroyam Titanomagnetite Ore During Metallization in Rotary Kiln |
| 5803 | P.A. Gamov, A.D. Drozin
Mathematical Model of the Reduction of Metals from Complex Polymetallic Types of Ore Applicable to the Electron Mechanism |
| 5939 | A.S. Bilgenov, P.A. Gamov, V.E. Roshchin
Metallographic Estimation of the Number of Forming Metallic Particles Obtained During Direct and Indirect Reduction of Metals from Complex Oxides |
| 6131 | E.A. Devyatykh, T.O. Devyatykh, A.N. Boyarsky
Survey of methods of refining catalysts for the extraction of platinum group metals |
| Section 3. Technologies of hydrometallurgical processes |
| 1.7.2 | Oleg A. Dizer, Denis A. Rogozhnikov, Stanislav S. Naboichenko
Hydro chemical investigation of dissolving sulfide gold-bearing raw material of Uderey deposit |
| 1.7.4 | R.E. Rusalev, D.A. Rogozhnikov, S.S. Naboichenko
Nitric acid treatment of Olimpiada deposit refractory gold-bearing concentrate |
| 1.7.5 | Konstantin Timofeev, Vasilii Kurdiumov, Gennady Maltsev
Sorption and Membrane Technologies for Mine Water Purification |
| 1.7.6 | A.A. Nabiyeva, N.A. Kulenova, S.V. Mamyachenkov
Studying kinetics of arsenic recovery from copper drosses by alkaline sulfide leaching |
| 1.7.7 | Nina V. Nemchinova, Andrey A. Tyutrin, Vladimir V. Somov
Study of Influence of Parametrs of Leaching Fluorine from Spent Pot Lining |
| 1.7.8 | Almaz Kozhonov, Zheenayym Maymanova, Aleksei Kritskii
Choice of efficient technology for aged enrichment tailings processing |
| 1.7.9 | O.A. Dryuchkova, R.A. Bykov, Mamyachenkov
The ways of development of combined hydrometallurgical technology for processing of complex ores’ beneficiation tailings |
| 1.7.10 | В.В. Жмурова, Н.В. Немчинова, А.А. Васильев
Химическое обогащение золотосодержащих катодных осадков |
| 1.7.11 | Aleksei Kritskii, Smirnov Ivan / А.В. Крицкий, К.А. Каримов, С.С. Набойченко
Pressure leaching of chalcopyrite concentrate: iron removal from leaching residues
Удаление железа из кеков автоклавного выщелачивания халькопиритного концентрата |
| 1.7.12 | А.В. Крицкий, К.А. Каримов, С.С. Набойченко
Измельчение халькопиритных концентратов как метод интенсификации процесса выщелачивания |
| 1.7.13 | Irina V. Loginova, Aleksei V. Kyrchikov
Complete processing of the high-iron content red mud |
| 1.7.14 | Viktoria V. Zhmurova, Nina V. Nemchinova, Andrey A. Vasilyev
Quality Increase in the Gold-Containing Cathode Sediment |
| 5546 | K.D.Naumov, K.A. Karimov, A.M. Klyushnikov
Complex rare earth minerals sulfate decomposition techniques investigation |
| 5547 | V.G. Lobanov, K.D. Naumov, A.A. Korolev
Theory of copper-electrolyte slimes decoppering in the presence of hydrogen peroxide |
| 5548 | O.Yu. Makovskaya, K.S. Kostromin
Leaching of Non-Ferrous Metals from Galvanic Sludges |
| 5692 | V.B. Chernyshov, A.A. Shoppert, V.I. Sarapulova
Improvement of stirred tank for aluminum hydroxide seeded precipitation |
| 5874 | O.Yu. Makovskaya, T.D. Polshina
Application of inorganic Fe(III)-based sorbent for arsenic sorption |
| 5970 | A.A. Shoppert, I.V. Loginova, V.N. Pismak
Investigating of a low-grade copper concentrate desilication by alkali pressure leaching |
| 6232 | Anton Kovyazin, Konstantin Timofeev, Sergey Krauhin
Copper smelting fine dust autoclave leaching |
| Section 4. Modern problems of foundry productionа |
| 1.3.1 | В.Е. Баженов, Ю.В. Целовальник, А.В. Колтыгин
Определение коэффициентов теплопередачи между отливками из сплавов АК7, МЛ5 и формой из графита |
| 1.3.2 | R.V. Gavariev, I.A. Savin, I.O. Leushin
To the Question of Casting Alloys of Non-Ferrous Metals in the Metal Mold |
| 1.3.4 | A.D. Shlyaptseva, I.A. Petrov, A.P. Ryakhovskii
Prospects of using titanium dioxide as a component of modifying composition for aluminum casting alloys |
| 1.3.5 | Andrei Sholomitskii, Aleksey Sotnikov
Position Control and Alignment of the CCM Equipment |
| 1.3.6 | I.E. Illarionov, T.R. Gilmanshina, A.A. Kovaleva
Perspective Methods of Graphite Quality Improving |
| 1.3.7 | Vladislav Deev, Evgeny Prusov, Evgeny Rakhuba
Physical Methods of Melt Processing at Production of Aluminum Alloys and Composites: Opportunities and Prospects of Application |
| 1.3.8 | Ivan N. Erdakov, Vasily A. Ivanov, Alexander V. Vyboishchik
Forecasting the structure and the hindered contraction of casts by using the ProCAST system of engineering analysis |
| 1.3.10 | L.G. Znamensky, A.N. Franchuk, A.A. Yuzhakova
Nanostructured Materials in Preparation Casting Alloys |
| 1.3.11 | L.G. Znamenskii, O.V. Ivochkina, A.S. Varlamov
Acceleration of the Formation on the Sodium Silicate Binder in Investment Casting |
| 1.3.12 | B.A. Kulakov, V.K. Dubrovin, O.M. Zaslavskaya
Evaluating Heat Resistance of Mold Shells in Investment Casting |
| 1.3.13 | Yevgen Smyrnov, Vladimir Belevitin, Vitalii Skliar
Application of Numerical Model of Continuous Cast Bloom Crystallization to Improve the Efficiency of Mechanical Soft Reduction Technology |
| 5577 | Viktor A. Kukartsev, Vladislav V. Kukartsev, Vadim S. Tynchenko
The Experience of Liquid Glass Mixture Using for Alphaset Process in Russia |
| 5679 | Viktor A. Kukartsev, Vladislav V. Kukartsev, Vadim S. Tynchenko
Specialty of Сarbon-carbid-cilicic Mixture using (UKKS) as Substitute of Recarburizing Agent and Ferrosilicon for Grey Iron Melting |
| 5964 | I.E. Illarionov, T.R. Gilmanshina, A.A. Kovaleva
Perspective Methods of Graphite Quality Improving |
| 1.1.7 | Konstantin N. Vdovin, Igor M. Yachikov, Kirill A. Danilyuk
Model for Solidification of the Working Layer of the Roll in the Chill of the Centrifugal Machine |
| 1.1.60 | А.S. Nuradinova, L.H-A. Saipova, N.S. Uzdieva
Influence of the Intensity of Electromagnetic Mixing in Continuous Casting Machine Crystallizer on the Formation of Grade Blanks |
| Section 5. Metal forming: rolling, stamping, forging, pressing |
| 1.4.1 | E.G. Demyanenko, I.P. Ророv
Investigation of the Flanging Process for the Parts with High Conical Angles |
| 1.4.3 | Igor Petrov, Veniamin Kharitonov, Marina Polyakova
Procedure for Evaluating Competitiveness of Production Processes |
| 1.4.4 | M.V. Kharchenko, V.N. Kononov, E.S. Zambrgitckaya
Elastohydrodynamic friction mode as a method of surface finishing excluding burnishing |
| 1.4.6 | Aleksey Antimonov, Nadezhda Pushkareva
Fuel Pipes Coil Drawing Line Production for Diesel Engines |
| 1.4.7 | Aleksey Antimonov, Nadezhda Pushkareva
Surface Pressure Treatment of Titanium Alloy Bars by Transverse Rolling |
| 1.4.8 | A.O. Tolkushkin, S.N Lezhnev, A.B. Naizabekov
Development and Research of the Billet Forging Technology in the Newly Designed Step-Wedge Dies |
| 1.4.10 | R.O. Tkacho, V.V. Kukhar, E.S. Klimov, A.H. Prysiazhnyi
Development and Application of Tube End Forming Process with Combined Swaging and Local Differential Pre-heating |
| 1.4.12 | Arkady M. Mikhailenko, Danil L. Shvarts, Sergey O. Nepryakhin
Generalized Model of Section Two-Roll Rolling. Geometry of the Zone of Deformation |
| 1.4.13 | Valery L. Dilman, Tatyana V. Karpeta, Aws Nedal Dheyab
Stress-Strain State of a Plastic Layer under Compression by Two Rigid Parallel Rough Plates |
| 1.4.14 | E.V. Timakov, F.S. Dubinskiy
Numerical Analysis and Simulation of the Straightening Process of Heavy Rails on a Horizontal Roller-Straightening Machine |
| 1.4.15 | Dmitry Pavlov, Alexandr Bogatov, Elena Pavlova
The investigation of roll and mandrel calibration influence on metal forming during pipe rolling on a short mandrel by the use of a computer simulation |
| 1.4.16 | Vladimir P. Volkov, Denis R. Salikhyanov, Ivan S. Kamantsev, Aziret A. Shamshiev
Development of a Method of Forging Long-length Blanks with Intensification of Shear Deformation |
| 1.4.17 | Vladimir Toporov, Aleksandr Bogatov, Danis Nukhov
Study of the Tubular Billets Geometric Characteristics During Computer Simulation of the Rotary Piercing Process |
| 1.4.18 | O.H. Kurpe, V.V. Kukhar
Development and Optimization of Flat Products Manufacturing at Rolling Mill 3200 |
| 1.4.19 | Andrey A. Udalov, Aleksander V. Udalov, Sergey V. Parshin
Influence Of The Profile Radius Of The Deforming Roller On The Limit Degree Of Deformation In The Process Of Flow Forming |
| 1.4.20 | Anatole Pellenen, Nadezhda Kareva, Vasiliy Ivanov
Studies on technological features of obtaining thin bimetallic brass-aluminum-brass strips |
| 1.4.21 | Andrey A. Udalov, Aleksander V. Udalov, Sergey V. Parshin
Influence Of Deformation Conditions On The Power Regimes Of The Process Of Cold Crimping Of A Pipe Billet In A Conical Die |
| 1.4.22 | О.С. Лехов, А.В. Михалев, М.М. Шевелев
Оценка напряжений в бойках различной конструкции установки непрерывного литья и деформации при получении листов из стали |
| 1.4.23 | О.С. Лехов, Д.Х. Билалов
Исследование напряжений в бойках от усилия обжатия при получении листов из дюралюминия на установке непрерывного литья и деформации |
| 1.4.25 | Nikita S. Deryabin
The study of deformability of heat-resistant alloy named “Inconel alloy 625” for estimation of plates production possibility at wide-strip rolling “mill 2300” |
| 1.4.26 | L.V. Radionova, V.A. Ivanov, S.S. Strugov
Study of force and kinematic parameters of the low-waste, zero-draft hot forging of welding neck flanges on the basis of a combined expansion-extrusion deforming procedure |
| 1.4.27 | Ludmila V. Radionova, Viacheslav V. Shirokov
Studies Of Influence Of Process Parameters On The Strain Rate At High-Speed Wire Drawing |
| 1.2.21 | D.I. Kinzin, S.A. Levandovskiy, N.S. Soloveva
Management of Rolls Handling Facilities of Long Products Shop |
| 5314 | A.G. Illarionov, Yu.N. Loginov, S.I. Stepanov
Structure and Mechanical Properties of Electrical Copper Wire Processed by Coarse and Medium Drawing |
| 5331 | Abdrakhman Naizabekov, Sergey Lezhnev, Evgeniy Panin
Experimental study of energy-force parameters of combined process "rolling - ECA-pressing" |
| 5433 | Yaroslav Erisov, Fedor Grechnikov, Alexandr Kuzin, Igor Bobrovskij
Texture Evolution during Hot Deformation of Al-Cu-Li-Mg-Zn-Zr-Sc alloy |
| 5878 | Vladimir N. Shinkin
Residual Stresses in Elastoplastic Bending of Round Bar |
| 5879 | Vladimir N. Shinkin
Tubes’ Rupture at Faulty Fusion of Welding Seam |
| Section 6. Technologies of welding production |
| 1.5.1 | I.Yu. Matushkina, S.V. Anakhov, Yu.A. Pyckin
Evaluation Of The Effectiveness Of Plasma Torches Design For Metal Cutting By Qualimetric Method |
| 1.5.2 | M.Z. Zaripov, A.M. Fairushin, D.V. Karetnikov
Conditions of Possible Application of Vibration Processings in the Course of Welding |
| 1.5.3 | Vladimir P. Sidorov
Calculation of Modes of Arc Welding Under the Flux of Double-Sided Butt Joints |
| 1.5.4 | Yu.S. Davydov, Yu.S. Korobov, A.Yu. Davydov
The influence of the electrode extension on the welding-technological characteristics of pulsed arc welding using cored wire |
| 1.5.7 | Azat T. Gabdrakhmanov, Irek H. Israphilov, Lenar N. Shafigullin
Research of laser welding of thin-sheet structural steels by pulsed laser radiation |
| 1.5.13 | А.С. Атамашкин, Е. Ю. Приймак, Е. А. Кузьмина
Эволюция структуры и механических свойств сварных соединений среднеуглеродистых сталей, выполненных ротационной сваркой трением, при нагреве |
| 1.5.14 | А.А. Артемьев, И.В. Зорин, Г.Н. Соколов
Исследование процессов высокотемпературного изнашивания наплавленных сплавов |
| 1.5.16 | Dmitry S. Belinin, Sergei D. Neylybin, Yuri D. Shitsyn
The Comparison Research of Plasma Surface Hardening of 34CrNiMo6 Steel Produced on Direct and Reversed Polarity Current |
| 1.5.18 | Voldemar Muktepavel, Victor Murzin, Vyacheslav Karpov, Arthur Kurakin
Research on welding and processing behavior of electrodes and features of their application in "wet" underwater arc welding |
| 1.5.19 | A.K. Tingaev
Kinetics of Residual Stresses in a Welded Frameless Tubular Node |
| 1.5.21 | Ivan A. Ilin, Anna A. Krasnoperova, Evgenii A. Sirotkin
Effect study of thermal cutting methods on the edge’s microstructure of high-strength steel grade S700MC |
| 1.5.22 | M.A. Ivanov, A.G. Alruhaimi, S.I. Voronin
Dependence of Cold Cracks Formation from the Heat Input When Welding of High Strength Steel with Yield Strength of 500 MPa |
| 1.5.24 | A.M. Osipov, Yu.V. Bezgans, D.G. Lodkov
Welding of Valve Steels of Different-sized Cross Sections |
| 5402 | Stanislav V. Naumov, Аrseniy O. Artemov, Kirill I. Belousov
Research on plasma electric arc granulation processes of Ural region mineral raw materials to welding materials for submerged arc welding |
| 5968 | A.L. Romantsov, M.A. Fedorov, D.G. Lodkov
Austenite Decomposition Kinetics In Laser-Hybrid Welding Of Steel Of Strength Class K52 |
| Section 7. Additive manufacturing |
| 1.6.1 | Denis Levashkin, Pavel Ogin, Vasilyev Fedor
Efficiency of hybrid cyclic processing with the use of additive technologies on CNC machines for the manufacture of composite aviation parts due to the reduction of processing errors |
| 1.6.3 | R.M. Baitimerov, A.B. Liberzon and V.I. Mitin
Selective Laser Melting of Mixed EP648-Alumina Powder |
| 1.6.4 | P.A. Lykov
The Energy Density as a Reliable Parameter for Characterization of Selective Laser Melting of Various Alloys |
| 1.6.5 | R.M. Baitimerov
Single Track Formation during Selective Laser Melting of Ti-6Al-4V Alloy |
| 1.6.7 | O.V. Peshikov, K.Yu. Pashkeev, S.I. Samodurov, R.A. Shpota / О.В. Пешиков, К.Ю. Пашкеев, С.И. Самодуров, Р.А.Шпота
Restoration of surgical instruments by laser welding
Восстановление хирургического инструментария методом лазерной наплавки |
| 5268 | Yu.N. Loginov, S.I. Stepanov, S.K. Grekhov
Properties Anisotropy of Additive Manufactured High-porous Titanium Alloy with Non-equiaxial Cellular Structure |
| 5960 | Evgenii Borisov, Anatoly Popovich, Vadim Sufiiarov, Igor Polozov, Alexey Orlov, Dmitry Masaylo, Viktoriia Sokolova
Formation of structure in titanium lightweight structures made by selective laser melting |
rusmetalcon@gmail.com
