№ |
Фамилии авторов, название доклада |
Секция 1. Материаловедение и физикохимия материалов |
1_1_1 | D.N. Permyakov, V.I. Astashchenko, S.D. Kugultinov Technological Justification of the Possibility of Applying Wear-Resistant Coatings for Strengthening Machine Parts |
1_1_2 | A.N. Baranov Composite Chrome Coatings in Aluminum Production |
1_1_3 | R.S. Mikheev, I.E. Kalashnikov, P.A. Bykov Investigation of the Diffusion Zone Formation Mechanisms during the Production of Functional Steel-Aluminium Compositions by Arc Processes |
1_1_4 | O.S. Molochkova, E.Yu. Zvyagina, N.Yu. Abarovich Ensuring the Quality of Self-Tapping Screws by Replacing the Thermochemical Treatment Line |
1_1_5 | E. Nikolaeva, A. Chapyshev, A. Spitsyn Studying the Structure and Properties of the Material of Screws for Spinal Osteosynthesis |
1_1_6 | A.V. Shaparev, I.A. Savin, S.N. Ptichkin Mechanical Similarity Principle for Measurement Metal Hardness |
1_1_7 | Yu.B. Egorova, L.V. Davydenko, I.M. Mamonov Mechanical Properties of Titanium Alloys at Operating and Pressure Shaping Temperatures Depending on the Aluminum and Molybdenum Equivalents |
1_1_8 | O.V. Kudryakov, V.N. Varavka, I.V. Kolesnikov Self-Healing of PVD-Coatings |
1_1_9 | I.S. Safronov, I.V. Ushakov, V.I. Minaev Influence of Environment at Laser Processing on Microhardness of Amorphous-Nanocrystalline Metal Alloy |
1_1_10 | I.F. Uvarova Laser-Induced Vacancies-Relief Ordered Structures on Titanium Surface |
1_1_11 | V.I. Astaschenko, G.F. Mukhametzyanova, A.G. Shagiev Criteria for Evaluating the Manufacturability of Steels when Cutting with an Edge Tool |
1_1_12 | D. Maiorov, Y. Velyaev, K. Yakovlev Effect of Surface Tension of Intrapore Fluid on Physicochemical Properties of Al2O3•nH2O |
1_1_14 | Д.Н. Полозов, А.С. Куцемир, В.М. Коломин, А. Ю. Ненилина Разработка и изготовление многослойных керамических плат на базе отечественных материалов по технологии LTCC |
1_1_15 | V.N. Varavka, O.V. Kudryakov, I.S. Morozkin Mechanisms of Plastic Deformation during Laser Heat Treatment of ARMCO Pure Iron |
1_1_16 | O.A. Nasibullina Study of the Behavior of SS34 in a Free and Heat-Treated State |
1_1_17 | M.P. Kuz’min, M.Yu. Kuz’mina, M. Ravichandran Determination of The Thermodynamic Stability of Intermetallic Compounds in Technical Aluminum |
1_1_19 | V.S. Volosatova, A.S. Kuz’mina, M.P. Kuz’min The Impact of Ferro-and Superparamagnetic Nickel Particles on the Magnetism of YBCO Superconducting Ceramics |
1_1_20 | N.A. Svinkin, A.S. Kuz’mina, M.P. Kuz’min Transport Properties of Ferromagnet/Superconductor and Superparamagnet/Superconductor Heterostructures Based on Ni/YBCO |
1_1_21 | E. Zenkov, L. Tsvik Modeling the Structural Strength of Materials on Disk Laboratory Specimens |
1_1_22 | I.V. Ushakov, A.D. Oshorov Viscosity of Microdestruction of Multilayer Composite and Method of Its Revealing |
1_1_23 | Iu. Savchenko, A. Shapoval, I. Kuziev Modeling of High Module Power Sources Systems Safety Processes |
1_1_24 | V. Kulynych, A. Shapoval, V. Dragobetskii Hard Alloys Recycling as a Promising Direction of Technological Equipment for Machine-Building Production |
1_1_25 | A.A. Hlybov, E.L. Vorozheva Studying on the Internal Quality of Steel at Various Stages of Production: Slab-Rolled Metal |
1_1_27 | D. Maiorov, Yu. Velyaev Structural and Surface Properties of Silicon Dioxides Obtained by Extraction from Sulfuric Acid Solutions of Nepheline Decomposition |
1_1_28 | С.В. Коротовская, О.В. Сыч, Н.С. Новоскольцев Исследование структурообразующих процессов в низкоуглеродистых судостроительных сталях |
1_1_29 | E.D. Nazarova, V.Yu. Filin, I.A. Galchun On the Problem of Getting a Correct Crack Shape in Fracture Toughness Specimens of Low-Carbon Steel |
1_1_30 | A.V. Brover, G.I. Brover, I.A. Topolskaya Physical Aspects of Laser Steel Processing in the Magnetic Field |
1_1_31 | V.N. Pustovoit, Yu.V. Dolgachev Interaction of Ferromagnetically Ordered Clusters with Dislocations in Austenite and Twinning |
1_1_33 | D.D. Vlasov, N.A. Tatus, A.N. Polilov The Effect of Hole Manufacturing Technology on the Strength of Orthogonally Reinforced Fibrous Composites |
1_1_34 | F.V. Vodolazskiy, A.G. Illarionov, M.A. Ryzhkov Evolution of Phase Composition and Thermal Expansion during Heating of VT23 Titanium Alloy |
1_1_35 | A.I. Bogdanov, V.P. Kulevich, V.G. Shmorgun FEM Simulation of Sclerometric Test of Nickel Aluminide Layered Coatings |
1_1_36 | D.P. Sherstyuk, V.E. Zhivulin, D.A. Vinnik Correlation of the Chemical Composition and Structural Characteristics in the Partially Substituted Spinel Ferrites |
1_1_37 | M.E. Goshkoderya, T.I. Bobkova, M.V. Staritsyn Investigation of Composite Coatings of the Ti/TiB2 System Sprayed by the Microplasma Method |
1_1_39 | S.A. Bogomolova, I.V. Muravyeva Methods for the Determination of Chloride-Ion in Soils from the Territory of Nearby Metallurgical Enterprises: Guidelines for Selection |
1_1_40 | Yu.A. Napol’skikh, A.A. Shoppert, I.V. Loginova The Optimization of Sc Recovery from Red Mud Obtained by Water-Leaching and Bauxite-Sintering Product |
1_1_41 | L.G. Kolyada, A.P. Ponomarev, E.V. Tarasyuk On the Issue of Safety of Multilayer Protective Angle Pieces for Metal Products Packaging |
1_1_42 | N.N. Klochkova, A.V. Obuchova, A.N. Protsenko Specially Designed Induction Heating System for Ball Hardening |
1_1_43 | V.N. Malikov, A.V. Ishkov Using Ultra-Miniature Eddy Current Transducer for Searching for Corrosion Defects in Steel Pipes |
1_1_44 | I.A. Nasyrov, D.D. Fazullin, G.V. Mavrin Influence of Particle Size Distribution of Wood Waste Pyrolysis Product on Productivity and Purification Efficiency |
1_1_45 | N.V. Nemchinova, A.V. Tuzov Issues of Operating Induction Furnaces in the Context of Mounting Prebaked Anodes in Aluminium Electrolysis Cells |
1_1_46 | M.V. Konstantinova, E.A. Guseva, NA. Astafeva The Use of Silicon Production Waste as an Effective Additive in the Manufacture and Machining of Various Materials |
1_1_47 | I.V. Pchelnikov, A.I. Vergunov, A.Y. Cherkesov Production Tests of the Don Water Purification and Disinfection Technology |
1_1_48 | M.V. Shubina, E.S. Makhotkina Analysis of the Leaching Stage Effect on the Vanadium Extraction from Technogenic Raw Materials |
1_1_49 | K.P. Pavlova, I.A. Solizoda, D.A. Vinnik Synthesis, Structure and Properties of Barium Ferrites BaFe11M1O19 (M= Al, Ti and Mn) Ceramics |
1_1_50 | Yu. Bakhracheva Investigation of the Effect of Thermocyclic Treatment on the Mechanical Properties of Steel |
1_1_51 | M.D. Kazyaev, E.V. Kiselev, A.M. Vokhmyakov Continuous Uncooled Walking Beam Furnace for Copper Alloy Cast Blank Heating |
1_1_52 | A.M. Kokurov Composite and Metal Structural Elements Joint Strength |
1_1_60 | Солизода Иброхими Ашурали Влияние Al3+ на структуру и свойства гексаферрита бария |
Секция 2. Теория и технология пирометаллургических процессов |
1_2_1 | N.V. Nemchinova, A.Yu. Lazko How the Chemistry of Raw Materials Affects Aluminum Produced in Cells with Prebaked Anodes |
1_2_2 | A.V. Nikanorov, E.Yu. Azarov Ducat Deposit Concentrate Pyrometallurgical Processing Technology |
1_2_3 | S.S. Belskii, I.I. Aponchuk, L.V. Molokova Phase Diagrams of Me-O-C Systems to Study Metallurgical Processes |
1_2_4 | A.A. Tyutrin, A.A. Vasilyev Investigation of the Impurities Formation during the Silicon Melt Crystallization |
1_2_5 | V.A. Salina, V.I. Zhuchkov Study of Manganese Recovery in the CaO-SiO2-MgO-Al2O3-MnO-Fe2O3 System by Thermodynamic Simulation |
1_2_6 | V.A. Sokolnikov, A.A. Tyutrin Protection of Сast Iron Sections of Gas-Collecting Bell of Soderberg Electrolysis Cell |
1_2_7 | V.A. Bigeev, M.V. Potapova, I.V. Makarova Research of Ferronickel Manufacturing Process by Selective Reduction of Poor Iron-Chromium-Nickel Ores |
1_2_8 | V.A. Bigeev, M.V. Potapova, I.V. Makarova Experimental Determination of the Main Parameters of the Refining Process of Rough Ferronickel, Obtained by Iron-Chromium-Nickel Selective Reduction |
1_2_9 | D.K. Egiazaryan, A.V. Sivtsov, M.M. Tsimbalist Laboratory Assessment of the Technogenic Raw Materials Briquettes Effect on the Arc Furnace Electric Mode |
1_2_10 | B.P. Yur`ev, V.A. Dudko Impact of Initial Titanium Magnetite Ore Material Composition on Fluxed Pellet Metallurgical Properties |
1_2_11 | B.P. Yur`ev, V.A. Dudko Process Development for Integrated Use of Metallurgical Production Wastes |
1_2_12 | V.I. Bobkov, M.V. Chernovalova, A.M. Sokolov Mathematical Models for an Energy Intensive Multistage Roasting Process of Pelletized Industrial Waste from Apatite-Nepheline Ores |
1_2_13 | A.A. Tyutrin, A.E. Burdonov, K.S. Bushuev Expanding the Application Scope of Fine Dust from Petroleum Coke Calcining Furnaces in Aluminum Production |
1_2_14 | D.R. Ganin, D.A. Dolganov, E.A. Fuks Technology and Equipment for Sintering of Iron-Ore Materials by Adding Brown Iron Ores as Pulp during Sinter Mix Pelletizing at Ural Steel, JSC |
1_2_20 | Смирнов К., Гамов П.А. / Smirnov K., Gamov P.A. Пирометаллургическое восстановление и разделение железа в ильменитовом концентрате |
1_2_21 | Адилов Г., Рощин В.Е., Поволоцкий А.Д. / Adilov G., Roshchin V.E., Povolockij A.D. Переработка медеплавильных шлаков с получением востребованных продуктов металлургического и нефтяного производств |
1_2_22 | Косдаулетов Н., Рощин В.Е. / Kosdauletov N., Roshchin V.E. Пирометаллургическое отделение оксидов марганца железомарганцевой руды от железа и фосфора |
1_2_23 | Сулеймен Б., Салихов С.П. / Suleyman B., Salikhov S.P. Возможность селективного восстановления железа и фосфора оолитовых руд |
Секция 3. Теория и технология гидрометаллургических процессов |
1_3_1 | N.V. Nemchinova, A.N. Baranov, A.E. Barauskas Choosing the Reagent to Leach Fluorine From Spent Pot Lining of Aluminum Electrolysis Cells |
1_3_3 | L.V. Sokolov, V.G. Lobanov, O.B. Kolmachikhina Methodological Specificities for Researching Electrophysical Activation of Zinc Cake Leaching |
1_3_4 | A.V. Nikanorov Improvement of the Technology of Fluorine Recovery from Solid Waste of Primary Aluminum Production |
Секция 4. Современные проблемы литейного производства |
1_4_1 | R.V. Gavariev, K.N. Gavarieva Features of Casting Magnesium Alloys in Chill Mold |
1_4_2 | M.G. Potapov, B.B. Zaritskiy, N.A. Kuts The Effect of Cooling Rate on Structure, Basic Mechanical and Special Properties of Complex Alloyed Manganese Cast Iron |
1_4_3 | M.G. Potapov, B.B. Zaritskii, N.A. Kuts Development and Introduction of a New Composition of Wear-Resistant Cast Iron with Improved Performance Properties for Castings of Pump Parts |
1_4_4 | R.V. Gavariev, K.N. Gavarieva On the Issue of Casting Copper Alloys in Chill Mold |
1_4_5 | A.A. Tokarev, D.A. Boldyrev, B.A. Kulakov, L.I. Popova Control of Compacted Graphite Iron Production Process by Using the Thermal Analysis System |
1_4_10 | I.A. Alekseev A numerical simulation of metal droplet transfer during direct current electroslag remelting using the finite volume method |
1_4_11 | V.V. Seduhin On the titanium carbide introduction into stainless steel and its effect on the mechanical properties of cast metal |
Секция 5. Обработка материалов давлением |
1_5_1 | A. Naizabekov, S. Lezhnev, E. Panin Study of the Influence of Geometric Parameters on the Destruction Possibility of Aluminium Alloys during Pressing in Equal-Channel Step Matrix |
1_5_2 | S.M. Belskiy, I.I. Shopin Local Thickenings and Thinnings of Hot Rolled Strips |
1_5_3 | V.N. Shinkin Bauschinger Effect, Masing Principle and Hencky Theorem for Bending Moment at Repeated Alternating-Sign Bending of Steel Sheet |
1_5_6 | V.I. Bobkov, E.V. Morgunova Analysis of the Granulometric Composition of the Feedstock Influence on Mechanical Properties of Iron Ore Pellets |
1_5_8 | A. Volokitin, I. Volokitina, E. Panin New Die Design for High-Pressure Torsion |
1_5_9 | S. Lezhnev, A. Naizabekov, E. Panin Radial-Shear Rolling as a New Technological Solution for Recycling Bar Scrap of Ferrous Metals |
1_5_10 | Торгонин К.С., Широков В.В. Исследование причин возникновения утонения при штамповке отводов |
1_5_11 | Фаизов С.Р., Радионова Л.В., Сарафанов А.Е. Проектирование оснастки для прямого прессования проволоки на основе моделирования и прочностного анализа |
1_5_12 | L.V. Radionova, R.A. Lisovskiy, A.S. Svistun and I.N. Erdakov Change in Mechanical Properties During Drawing of Wire from Ni 99.6 |
1_5_13 | Громов Д.В., Радионова Л.В., Свистун А.С. Компьютерное моделирование в программе QForm валковой формовки профиля из круглой сварной трубы |
1_5_14 | Сарафанов А.Е., Радионова Л.В. Применение роликового волочения при изготовлении простых и фасонных профилей из труднодеформируемых сплавов |
1_5_15 | Перевозчиков Д.В. Исследование кинетики роста зерна в гильзах из стали марки 08Х18Н10Т |
Секция 6. Теория и технология сварочного производства |
1_6_2 | E.D. Kozhukhar, A.R. Ruban Design and Manufacturing Technology of Round Samples for Studying the Effect of Defects on the Mechanical Properties of Welds |
1_6_3 | V.I. Kuz`min, V.I. Lysak, E.V. Kuz`min Kinetics of the Formation of Bimetallic Compounds and the Distribution of Energy Components in the Explosion Welding Process |
1_6_10 | Матросов А.А. / Matrosov A.A. Изготовление сварных тройников с композитным сварным швом |
1_6_11 | M.A. Fedorov, V.V. Khodchenkov, A.A. Stroganov Computer simulation of temperature fields to assess the grate formation during laser-hybrid welding of large-diameter pipes |
1_6_12 | A.I. Romantsov, V.A. Skorobulatov, S.I. Seliverstov The Influence of the focus position during laser-hybrid welding on the location of weld defects |
1_6_13 | M.A. Ivanov, A.I. Romantsov, K.V. Lozovoy Investigation of parameters of laser-hybrid pipe welding process on the welded joint quality |
Секция 7. Аддитивные технологии |
1_7_1 | Н.М. Сгонов Аддитивное производство изделий из высокоэффективной керамики |
1_7_2 | M.S. Anosov, D.A. Ryabov, D.A. Shatagin Assessment of Fracture Mechanisms and Temperature of Ductile-Brittle Transition of Metals Obtained on the Basis of 3D Printing Using Neural Network Modeling and Fractal Analysis |
1_7_5 | D. Shatagin, M. Anosov, A. Galkin, N. Klochkova Optimization of 3D Printing Modes for Electric Arc Surfacing Using a Digital Twin of the Process |
1_7_6 | I.A. Dyakov, I.S. Safronov Multi-Walled Carbon Nanotubes in Electrolytic Chromium Plating |
1_7_7 | T. Zimogliadova, K. Skorokhod, D. Cherkasov Structural Features of Ni-Based Self-Fluxing Alloy Protective Layers, Produced by Non-Vacuum Electron Beam Cladding, Reinforced with Titanium-Based Particles |
1_7_10 | Быков В.А., Радионова Л.В. Исследование износостойких покрытий, сформированных лазерной и электродуговой наплавкой |
1_7_11 | Глебов Л.А., Радионова Л.В. Оценка влияния траекторий нанесения порошкового материала сплава Ti6Al4V при прямом лазерном сплавлении на механические свойства при повышенных температурах |
1_7_12 | V.A. Ivanov Micromechanical model of compaction powder materials |
1_7_13 | Зараменских С.Е., Сиверин О.О. Определение прочностных свойств при испытании на срез и сжатие образцов из PLA и ABS, изготовленных методом FDM |